Cisco SFS7000P-SK9 Command Reference - Page 274

show ib sm neighbor Chapter 6 Show Commands show ib sm neighbor To display the InfiniBand devices that directly connect to your Server Switch, enter the show ib sm neighbor command in User Exec mode or Privileged Exec mode. show ib sm neighbor Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-only user. Command Output: Table 6-38 describes the fields in the show ib sm neighbor command output. Table 6-38 show ib sm neighbor Command Field Descriptions Field subnet-prefix local-node-guid local-port-id local-node-type remote-node-guid remote-port-id remote-node-type link-state link-width-active Description 64-bit value that identifies the InfiniBand subnet to which this neighbor node belongs. 64-bit GUID of the InfiniBand node. Port ID of the InfiniBand node. You must enter an integer between 0 and 255. Type of the InfiniBand node. The value appears as channel-adapter, switch, or router. 64-bit GUID of the neighboring InfiniBand node to which the local node links. Port ID of the neighboring InfiniBand node to which the local node links. You must enter an integer between 0 and 255. Type of the neighboring InfiniBand node. The value appears as channel-adapter, switch, or router. State of the link between the local and neighboring nodes. The value appears as noStateChange, down, initialize, armed, or active. Active link width. This parameter, with LinkSpeedActive, determines the link rate between the two connected nodes. The value appears as width1x, width4x, or width12x. 6-108 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02