Cisco SFS7000P-SK9 Command Reference - Page 186

show card Chapter 6 Show Commands Table 6-8 show card Command Field Descriptions (continued) Field boot status boot image product serial-number pca serial-number pca number fru number Description Boot Status may appear as any of the following: • upgrading • success • failed • badVersion • badCrc • memoryError • outOfSpace • programmingError • hardwareError • fileNotFound • inProgress Displays the active system image that the card runs when it boots. Displays the factory-assigned product serial number of the card. Displays the Printed Circuit-Assembly (PCA) serial number of the card. Displays the Printed Circuit-Assembly (PCA) assembly number of the card. Displays the field-replaceable unit (FRU) number of the card. Note When you run the show card command on a Cisco SFS 7008, an asterisk (*) next to the slot number identifies the controller card on which you executed this command. The asterisk does not identify the normal or standby controllers. That information appears in the oper code column. Examples This example displays the configuration and status information for cards 5, 9, 14, and 16: SFS-7000P# show card 5,9,14,16 Card Information admin oper admin oper oper slot type type status status code 5 en4port1G en4port1G up up normal 9 fc2port2G fc2port2G up up normal 14 controller controller up up normal 16 ib12port4x ib12port4x up up normal Card Boot Information boot boot boot slot stage status image 5 done success OS-1.1.2/build084 9 done success OS-1.1.2/build084 14 done success OS-1.1.2/build084 16 done success OS-1.1.2/build084 6-20 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02