Cisco SFS7000P-SK9 Command Reference - Page 141

Chapter 4 InfiniBand Commands ib sm db-sync new-session-delay delay resync-interval resync Specifies the amount of time that the master SM waits before it attempts to initiate a synchronization session with a new SM. Delay length, in seconds. This value defaults to 120 seconds. Specifies the interval at which the master SM sends a resynchronization request to all active sync sessions. Resynchronization interval, in seconds. This value defaults to 3600 seconds. Defaults Databases synchronize by default. Use the disable keyword to prevent synchronizing SM databases. For attribute-specific defaults, refer to the syntax description. Command Modes Global Configuration (config) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cicso 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-write access Synchronize the database of the master subnet manager with one or more standby subnet managers to retain all database information in the event of a failover. Note If you make configuration changes to the master SM and then save the configuration, verify that the master and backup have synchronized, then save the configuration on the backup as well. Examples The following example enables database synchronization on the IB fabric: SFS-7000P(config)# ib sm db-sync subnet-prefix fe:80:00:00:00:00:00:00 enable Related Commands show ib sm db-sync OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 4-3