Cisco SFS7000P-SK9 Command Reference - Page 383

Chapter 7 Diagnostic Commands diagnostic diagnostic To enter Diagnostic Configuration submode, enter the diagnostic command in Global Configuration mode. diagnostic {card {card-selection | all} | chassis | interface {fc | ib | ethernet} {interface-selection | all} | fan {fan-number | all} | power-supply {supply | all} | rack-locator {locator | all}} Note Not all syntax applies to all hardware platforms. Enter Diagnostic submode to run test on cards and interfaces. Syntax Description card card-selection chassis fan interface fc ib ethernet interface-selection all power-supply rack-locator Enters Card Diagnostic Configuration submode. Card, list of cards, or range of cards to diagnose. Configures chassis-specific diagnostic tests. Configures fan-specific diagnostic tests. Enters Interface Diagnostic Configuration submode. Specifies Fibre Channel interfaces. Specifies InfiniBand interfaces. Specifies Ethernet interfaces. Interface, list of interfaces, or range of interfaces to diagnose. Specifies all interfaces of the technology type that you specified for all cards. Configures power supply-specific diagnostic tests. Configures rack locator-specific diagnostic tests. Defaults This command has no default settings. Command Modes Global Configuration (config) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Note The SFS 3001 and SFS 3012 can run card and interface tests only. For the SFS 7000 and SFS 7008, the rack-locator keyword supports only 12x, not 4x. Privilege Level: Read-write user for the appropriate technology. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 7-217