Cisco SFS7000P-SK9 Command Reference - Page 156

arp ethernet Chapter 5 IP Commands arp ethernet To statically map an IP address to the physical machine address of an Ethernet host on the local network, enter the arp ethernet command in Global Configuration mode. To clear a static IP address, use the no form of this command. arp ethernet ip-address mac-address slot#/port# no arp ethernet ip-address mac-address Syntax Description ip-address mac-address slot# port# IP address of the host. MAC address of the host. Slot on the Server Switch that holds the Ethernet gateway that connects to the host. Ethernet gateway port that connects to the host. Defaults This command has no default settings. Command Modes Global Configuration (config) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Ethernet read-write user. The Server Switch supports dynamic ARP so that any IP host that connects to an Ethernet gateway port may see or detect all the other connected IP and IPoIB hosts. An ARP table contains the available ARP records in the gateway. An ARP record may be dynamically learned or statically created. In most cases, you can rely upon dynamic ARP addressing. Dynamic ARP records may be deleted from the table after a period of time, or updated, if a host address-change occurs. Examples SFS-7000P(config)# arp ethernet 10.2.0.50 00:30:48:23:A9:0A 4/1 Related Commands show arp ethernet Cisco SFS 7000 Series Product Family Command Reference Guide 5-2 OL-9163-02