Cisco SFS7000P-SK9 Command Reference - Page 68

gateway Chapter 2 Administrative Commands gateway To assign a default IP gateway to • the Ethernet Management port, • the virtual in-band InfiniBand port, enter the gateway command in the appropriate Interface Configuration mode. To disassociate a port from a gateway, use the no form of this command. gateway gateway no gateway Syntax Description gateway IP address of the gateway to assign to the port. Defaults The gateway address defaults to 0.0.0.0. Command Modes Ethernet Management Interface Configuration (config-if-mgmt-ethernet) submode, InfiniBand Management Interface Configuration (config-if-mgmt-ib) submode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted read-write user. The gateway that you assign connects the port to the InfiniBand backplane on your Server Switch. You must configure the gateway through the Serial Console port. Enter the IP address of the gateway when you configure the management interfaces. Examples The following example assigns a default IP gateway to the Ethernet Management interface: SFS-7000P(config-if-mgmt-ethernet)# gateway 10.3.0.94 The following example assigns a default IP gateway to the InfiniBand Management interface: SFS-7000P(config-if-mgmt-ib)# gateway 10.3.0.2 Related Commands show interface mgmt-ethernet show interface mgmt-ib snmp-server 2-38 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02