Cisco SFS7000P-SK9 Command Reference - Page 325

Chapter 6 Show Commands show interface fc Table 6-61 statistics Keyword Output Field Descriptions (continued) Field out-octets out-ucast-pkts out-multicast-pkts out-broadcast-pkts out-discards out-errors link-events fcp-cmds-outstanding fcp-cmds-completed fcp-errors fc-initiator-IO Description Cumulative number of octets transmitted out of the interface, including framing characters. Cumulative number of packets that higher-level protocols requested be transmitted and that were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Cumulative number of packets that higher-level protocols requested be transmitted and that were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Cumulative number of packets that higher-level protocols requested to be transmitted and that were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Cumulative number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free-up buffer space. For packet-oriented interfaces, the cumulative number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Cumulative number of link events processed by the Fibre Channel interface port. Cumulative number of FCP commands outstanding on the Fibre Channel interface port. Cumulative number of FCP commands completed on the Fibre Channel interface port. Cumulative number of FCP errors encountered on the Fibre Channel interface port. Cumulative number of transactions between the Fibre Channel initiator and this port. Table 6-62 describes the fields in the targets keyword output. Table 6-62 targets Keyword Output Field Descriptions Field wwpn wwnn description ioc-guid service-name Description World-wide port name (WWPN) of the target. World-wide node name (WWNN) of the target. Dynamically-assigned or administratively-assigned description of the target. Enter the fc srp target command with the description keyword to configure this field. I/O controller (IOC) GUID of the FC gateway that accesses the target. Name of the service that the target runs. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-159