Cisco SFS7000P-SK9 Command Reference - Page 39
link-trap, show fc srp initiator, show interface ethernet, show interface fc, shutdown, speed
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2 Administrative Commands auto-negotiate Ethernet: Before you enable auto-negotiation, follow these steps to verify that the Ethernet host supports auto-negotiation: Step 1 Step 2 Enter the show interface ethernet command in User Exec mode or Privileged Exec mode. Verify that the auto-negotiate-supported field displays yes. If the field displays no, you must manually configure the connection speed of the port. InfiniBand: Before you enable auto-negotiation, follow these steps to verify that the InfiniBand host supports auto-negotiation: Step 1 Step 2 Enter the show interface ib command in User Exec mode or Privileged Exec mode. Verify that the auto-negotiate-supported field displays yes. If the field displays no, you must manually configure the connection speed of the port. Examples The following example disables auto-negotiation on ports 1 through 2 on Fibre Channel card 5. The result of this command appears in the auto-negotiate field of the show interface fc command: SFS-7000P(config-if-fc-5/1-5/2)# no auto-negotiate The following example disables auto-negotiation on ports 1 through 4 on Ethernet card 4. The result of this command appears in the auto-negotiate-supported field of the show interface ethernet command: SFS-7000P(config-if-ether-4/1-4/4)# no auto-negotiate The following example enables auto-negotiation on port 1 on a Cisco SFS 7000. The result of this command appears in the auto-negotiate-supported field of the show interface ib command: SFS-120(config-if-ib-1/1)# auto-negotiate Related Commands link-trap name show fc srp initiator show interface ethernet show interface fc show interface ib shutdown speed OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 2-9