Cisco SFS7000P-SK9 Command Reference - Page 326

show interface fc Chapter 6 Show Commands Examples Table 6-62 targets Keyword Output Field Descriptions (continued) Field Description protocol-ids Lists the protocols that the target supports. fc-address Fibre Channel protocol address of the target. mtu Maximum transmission unit (MTU) of the target, in bytes. connection-type For this release, all targets connect to NL_Ports. physical-access Port, in slot#/port# format, on your Server Switch to which the target connects. Table 6-63 describes the fields in the virtual-ports keyword output. Table 6-63 virtual-ports Keyword Output Field Descriptions Field guid extension initiator-description wwnn port wwpn fc-address Description GUID of the physical initiator. GUID extension of the physical initiator. Administratively-assigned description of the initiator. World-wide node name (WWNN) of the initiator. Physical port on your Server Switch to which the virtual port maps. World-wide port name (WWPN) of the virtual port. Fibre Channel protocol address of the virtual port. The following example shows the output of the show interface fc command without the statistics keyword: SFS-7000P# show interface fc 5/1 Fibre Channel Interface Info port : 5/1 name : 5/1 type : fc2GFX desc : 5/1 (321) last-change : none fc-address : 00:00:00 wwnn : 00:00:00:00:00:00:00:00 wwpn : 00:00:00:00:00:00:00:00 mtu : 2080 auto-negotiate-supported : yes auto-negotiate : enabled admin-status : up oper-status : down admin-speed : 2gbps oper-speed : unknown oper-duplex : unknown admin-connection-type : force-NL oper-connection-type : down link-trap : enabled 6-160 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02