Cisco SFS7000P-SK9 Command Reference - Page 185
show card, show fan, Cisco SFS 7000 Series Product Family Command Reference Guide, OL-9163-02
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Chapter 6 Show Commands show card Table 6-8 Field oper code boot stage show card Command Field Descriptions (continued) Description Displays the general condition of the interface card. The general condition may appear as any of the following: • unknown • normal • wrongBootImage • bootFailed • tooHot • checkingBootImage • rebooting • booting • standby • recoveryImage A condition of "unknown" indicates an unsupported interface card. To address this condition, replace the card with a supported card. The oper code of a card must appear as normal for the oper status of the card to appear as up. A wrong-image condition indicates that the active system image on the interface card does not match the active system image on the controller. All cards must run the same active system image as the controller card to function. A bootFailed condition indicates that the active system image on the card was incompletely or incorrectly loaded. If the other interface cards come up successfully, reset the individual card. Otherwise, reboot your entire Server Switch. When your card overheats, the tooHot condition appears in the show card command output. Enter the show fan command to see if your fans have failed. The booting condition indicates that the card has not finished loading the necessary image data for internal configuration. Boot Stage could be any of the following: • recovery • ipl • ppcboot • fpga • pic • ib • rootfs • kernel • exe • done OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-19