Cisco SFS7000P-SK9 Command Reference - Page 257

Chapter 6 Show Commands show ib pm port monitor show ib pm port monitor To show the performance monitoring user-configured monitored ports, or the cumulative port counters, or the cumulative port counters for ports that have exceeded thresholds, enter the show ib pm port monitor command in User Execute mode or Privileged Execute mode. show ib pm port monitor [counter | error-counter] subnet-prefix prefix [node-guid guid [port-num port}] Syntax Description counter error-counter subnet-prefix prefix node-guid guid port-num port (Optional) Show the counters accumulated since monitoring was enabled. (Optional) Show the counters accumulated for ports that have exceeded thresholds. Specifies the subnet prefix of the port monitor. Subnet prefix of the port monitor. (Optional) Specifies the GUID of the device with the ports that you want to view. (Optional) GUID of the device with the ports that you want to view. (Optional) Specifies the port number of the port that you want to view. (Optional) Port number of the port that you want to view. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-only user. Command Output: subnet-prefix node-guid port-num chassis-guid slot-num ext-port-num data-is-valid Subnet to which the connection belongs GUID of the node belonging to the connection Port number on the node belonging to the connection. GUID of the chassis to which the port belongs (if available) Slot number on the chassis to which the port belongs (if available) Port number on the chassis slot to which the port belongs (if available) If the value is false, re-run the command to obtain valid data OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-91