Cisco SFS7000P-SK9 Command Reference - Page 158
config TACACS-server host, redundancy-group, show bridge-group, Global Configuration config mode
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
bridge-group Chapter 5 IP Commands Command Modes Global Configuration (config) mode, Ethernet Interface Configuration (config-if-ether) submode, Gateway Interface Configuration (config-if-gw) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Ethernet read-write user. Create bridge-groups to associate specific Ethernet gateway ports with Ethernet switch ports. Bridge Groups are used to associate the InfiniBand fabric with an Ethernet subnet. Examples The following example creates a bridge group and uses auto-detect to discover all available subnets: SFS-7000P(config)# bridge-group 61 The following example assigns a subnet prefix to a bridge group: SFS-7000P(config)# bridge-group 61 subnet-prefix 61.0.0.0 16 The following example disables multicast forwarding for a bridge-group: SFS-7000P(config)# no bridge-group 61 multicast The following example assigns bridge group 62 to the Ethernet interface slot 6, port 2: SFS-7000P(config-if-ether-6/2)# bridge-group 62 The following example assigns bridge group 62 to the internal gateway interface slot 6, ports 1 and 2: SFS-7000P(config-if-gw-6)# bridge-group 62 The following example assigns a bridge group to a redundancy group and configures the failover priority of the bridge group: SFS-7000P(config)# bridge-group 11 redundancy-group 11 fail-over-priority 10 Related Commands config TACACS-server host redundancy-group show bridge-group Cisco SFS 7000 Series Product Family Command Reference Guide 5-4 OL-9163-02