Cisco SFS7000P-SK9 Command Reference - Page 223

Chapter 6 Show Commands show fc srp initiator-wwpn-view show fc srp initiator-wwpn-view To display SRP targets that an initiator can access through one of its virtual ports, enter the show fc srp initiator-wwpn-view command in User Exec mode or Privileged Exec mode. show fc srp initiator-wwpn-view wwpn target Syntax Description wwpn target World-wide port name (WWPN) of the virtual port of the initiator. Displays the targets that your initiator can access through the virtual port. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Fibre Channel read-only user. Use this command to verify that your initiator connects to all of the targets that you configured for it. Table 6-21 describes the fields in the show fc srp initiator-wwpn-view command output. Table 6-21 show fc srp initiator-wwpn-view Command Field Descriptions Field Description wwpn World-wide port name (WWPN) of the target port that the initiator can access through the virtual port. wwnn World-wide node name (WWNN) of the target. description Description of the target. ioc-guid GUID of the I/O controller of the target. service-name Service name of the target. protocol-ids Protocols that the target supports. fc-address Fibre Channel address of the target. mtu Maximum transmission unit (MTU), in bytes, of the target. connection-type Displays nl-port to indicate a virtual FC port. physical-access Physical FC port (in slot#/port# format) of the virtual port. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-57