Cisco SFS7000P-SK9 Command Reference - Page 331

Chapter 6 Show Commands show interface gateway Examples Table 6-68 statistics Keyword Output Field Descriptions (continued) Field srp-connections fcp-cmds-outstanding fcp-cmds-completed fcp-errors fcp-initiated-ios fcp-bytes-read fcp-bytes-written Description Cumulative number of I/O connections that the gateway has used. Cumulative number of unresolved FCP commands on the gateway. Cumulative number of FCP commands that the gateway executed. Cumulative number of FCP errors that the gateway encountered. Cumulative number of I/O replies that FC devices sent through the gateway in response to SRP requests from initiators. Cumulative number of Fibre Channel Protocol bytes that the card has read since it came up. Cumulative number of Fibre Channel Protocol bytes that the card has written since it came up. The following example displays the attributes of the IP address of the gateway port: : SFS-7000P# show interface gateway 5 ip all IP Address Table port address mask bcast-addr reasm type status format max-size 4/0 10.3.22.0 255.255.255.0 1 0 primary active SFS-7000P# The following example uses the show interface gateway command to display general gateway properties. The information fields displayed depend upon the interface type. The example below displays the properties of a Fibre Channel gateway port. To see the properties of an Ethernet port, see the description of "show interface ethernet" section on page 6-148. SFS-7000P# show interface gateway 4 Gateway Information gateway : 4 name : 4/0 type : fc-gateway desc : 4/0 (320) last-change : none mtu : 0 admin-status : up oper-status : up SFS-7000P# OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-165