Cisco SFS7000P-SK9 Command Reference - Page 134

fc srp-global itl Chapter 3 Fibre Channel Commands Table 3-3 provides usage guidelines for this command. Table 3-3 Usage Guidelines for fc srp-global itl Command Arguments Policy sequential dynamic-gateway-port-failover dynamic-gateway-port-loadbalancing Description (Optional) Configures SRP global defaults for LUs of sequential access devices. Without this keyword, the configuration will be for the global defaults for LUs of random access devices. SRP global defaults for LUs of random/sequential access devices. Default for random devices: false Default for sequential devices: true This value is applied to LU entries as their default setting at entry creation time. You can overwrite the value on LU basis later. Allows the controller to select an alternate gateway interface port if the primary path fails. Enter the fc srp-global itl command with this keyword to enable this feature. Otherwise, include the no keyword at the beginning of the command string to disable this feature. If you enable this policy, you implicitly disable port load balancing and dynamic path affinity. SRP global defaults for LUs of random/sequential access devices. Default for random devices: true Default for sequential devices: false This value is applied to LU entries as their default setting at entry creation time. You can overwrite the value on LU basis later. Allows data to be sent between the initiator and Fibre Channel target using all available ports on the gateway interface. Port selection relies upon comparative I/O traffic. The controller attempts to distribute traffic equally between the ports. Enter the fc srp-global itl command with this keyword to enable this feature. Otherwise, include the no keyword at the beginning of the command string to disable this feature. If you enable this policy, you implicitly disable port failover and dynamic path affinity. 3-20 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02