Cisco SFS7000P-SK9 Command Reference - Page 208

show diagnostic interface fc Chapter 6 Show Commands show diagnostic interface fc To display completed or ongoing diagnostic tests for Fibre Channel gateway ports, enter the show diagnostic interface fc command in User Exec mode or Privileged Exec mode. show diagnostic interface fc {port | all} Syntax Description port all Ethernet port, in slot#/port# notation. Specifies all Ethernet ports on the Server Switch. Defaults This command has no default settings. Command Modes: User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Fibre Channel read-only user. Command Output: Table 6-14 describes the fields in the show diagnostic interface fc command. Table 6-14 show diagnostic card Command Field Descriptions Field test port validation data-size data-pattern iterations source-id target-id action result percentage-completed result-string Description Test that ran or runs on the card. Fibre Channel port number, in slot#/port# notation. Displays enabled or disabled to indicate validation status. Size of the test data. Pattern of the test data. Number of iterations of the test. Source WWPN for the test. Target WWPN for the test. Last action that an administrator performed on the test. Result of the last action that an administrator performed on the test. Percentage of the test that has executed. Result of the diagnostic test. 6-42 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02