Cisco SFS7000P-SK9 Command Reference - Page 83

Chapter 2 Administrative Commands mtu mtu To configure the maximum transmission unit on the chassis, enter the mtu command in InfiniBand Management Interface Configuration submode. mtu integer no mtu Syntax Description integer Slot of the controller card (1 on the Cisco SFS 3001 and Cisco SFS 7000, 1 or 14 on the Cisco SFS 3012). Defaults The IB MTU value defaults to 1500. Command Modes InfiniBand Management Interface Configuration submode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-write user. The maximum possible MTU for InfiniBand is higher than the MTU for Ethernet. To smoothly transition traffic through Ethernet gateways, the factory setting of IB MTU matches the maximum Ethernet setting. On an IB-only network, you can set the MTU as high as 2044. Examples The following example configures the IB MTU: SFS-120(config-if-mgmt-ib)# mtu 1500 Related Commands show interface mgmt-ib OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 2-53