Cisco SFS7000P-SK9 Command Reference - Page 269

Chapter 6 Show Commands show ib sm mft show ib sm mft Use this command to display the following: • Multicast forwarding information based on the block number. • Multicast entries that are currently in use by a subnet manager. To display multicast forwarding information based on the LID block number, enter the show ib sm mft command in User Exec mode or Privileged Exec mode. The command reports only the entries that are currently in use by a subnet manager. show ib sm mft subnet-prefix {prefix | all}[lid lid | node-guide guid] Syntax Description subnet-prefix prefix all lid lid node-guide guid Specifies the subnet prefix of the subnet manager with the status that you want to view. Displays the multicast forwarding table info for a specific subnet or all the subnets in the fabric. Currently, "all" is just an alias to the subnet value of the local subnet manager. Local ID of the subnet. Local ID number. Guide of the switch node in the subnet with the FDB to be accessed. Guide number. Defaults This command has no default settings. Command Modes User Exec mode, Privileged Exec mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-only user. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-103