Cisco SFS7000P-SK9 Command Reference - Page 254

show ib pm port counter config Chapter 6 Show Commands show ib pm port counter config To display the port counter configuration whether access to port counters is either enabled or disabled, enter the show ib pm port counter config subnet-prefix command in User Execute mode or Privileged Execute mode. Use the following syntax for this version of the command: show ib pm port counter config subnet-prefix prefix Syntax Description config subnet-prefix prefix Port counter configuration. Specifies the subnet prefix of the counters to view. Subnet prefix of the counters to view. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-only user. Command Output Description: subnet-prefix Subnet to which the port counter configuration applies. state State of port counter access. If 'enabled', then access to port counters is enabled. Examples The following example shows the configuration of the performance monitoring port counter: SFS-120# show ib pm port counter config subnet-prefix fe:80:00:00:00:00:00:00 IB PM Port Counter Configuration subnet-prefix : fe:80:00:00:00:00:00:00 state : enabled 6-88 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02