Cisco SFS7000P-SK9 Command Reference - Page 206
show diagnostic interface ethernet
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
show diagnostic interface ethernet Chapter 6 Show Commands show diagnostic interface ethernet To display completed or ongoing diagnostic tests for Ethernet gateway ports, enter the show diagnostic interface ethernet command in User Exec mode or Privileged Exec mode. show diagnostic interface ethernet {port | all} Syntax Description port all Ethernet port, in slot#/port# notation. Specifies all Ethernet ports on the Server Switch. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Ethernet read-only user. Command Output: Table 6-13 describes the fields in the show diagnostic interface ethernet command. Table 6-13 show diagnostic interface ethernet Command Field Descriptions Field test port validation data-size data-pattern iterations action result percentage-completed result-string Description Test that ran or runs on the card. Ethernet port number, in slot#/port# notation. Displays enabled or disabled to indicate validation status. Size of the test data. Pattern of the test data. Number of iterations of the test. Last action that an administrator performed on the test. Result of the last action that an administrator performed on the test. Percentage of the test that has executed. Result of the diagnostic test. 6-40 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02