Cisco SFS7000P-SK9 Command Reference - Page 210
show diagnostic interface ib
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
show diagnostic interface ib Chapter 6 Show Commands show diagnostic interface ib To display completed or ongoing diagnostic tests for InfiniBand switch ports, enter the show diagnostic interface ib command in User Exec mode or Privileged Exec mode. show diagnostic interface ib {port | all} Syntax Description port all Ethernet port, in slot#/port# notation. Specifies all Ethernet ports on the Server Switch. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-only user. Command Output: Table 6-15 describes the fields in the show diagnostic interface ib command. Table 6-15 show diagnostic card Command Field Descriptions Field test port validation data-size data-pattern iterations source-id target-id action result percentage-completed result-string Description Test that ran or runs on the card. InfiniBand port number, in slot#/port# notation. Displays enabled or disabled to indicate validation status. Size of the test data. Pattern of the test data. Number of iterations of the test. Source LID for the test. Target LID for the test. Last action that an administrator performed on the test. Result of the last action that an administrator performed on the test. Percentage of the test that has executed. Result of the diagnostic test. 6-44 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02