Cisco SFS7000P-SK9 Command Reference - Page 333

Chapter 6 Show Commands show interface ib show interface ib To display attributes of InfiniBand ports, enter the show interface ib command in User Exec mode or Privileged Exec mode. show interface ib port-selection [sma {node-info | port-info [detail]} | statistics] Syntax Description port-selection sma node-info port-info detail statistics Port, list of ports, or range of ports that you want to view. (Optional) Displays subnet management agent (SMA) information. (Optional) Displays node-based SMA information. (Optional) Displays port-based SMA information (Optional) Displays detailed, port-based SMA information. (Optional) Displays InfiniBand interface traffic statistics. Defaults See Table 6-69 through Table 6-73. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-only user. Without the optional sma or statistics keywords, the show interface ib command displays general information about the InfiniBand interface port, such as its administrative status, its operational speed and status, and duplex mode. Command Output: Table 6-69 describes the fields in the show interface ib command output. Table 6-69 show interface ib Command Field Descriptions Field port name Description Identifies the InfiniBand interface card and port. The format is slot#/port#. User assigned name. If no name is assigned, the port name is displayed instead. This field is set by the name command. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-167