Cisco SFS7000P-SK9 Command Reference - Page 265

Chapter 6 Show Commands show ib sm db-sync show ib sm db-sync Use this command to determine the following: • If the database of the master subnet manager synchronizes with one or more standby databases. • The frequency with which the databases synchronize. To display subnet manager synchronization information, enter the show ib sm db-sync command in User Exec mode or Privileged Exec mode. show ib sm db-sync subnet-prefix {prefix | all} Syntax Description subnet-prefix prefix all Specifies the subnet prefix of the subnet manager with the synchronization status that you want to view. Prefix of the subnet manager with the synchronization status that you want to view. Displays synchronization data for all subnet managers on the fabric. Defaults This command has no default settings. Command Modes User Exec mode, Privileged Exec mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-only user. Command Output: Table 6-35 show ib sm db-sync Command Field Descriptions Field subnet-prefix enable max-backup-sms session-timeout Description Subnet prefix of the subnet with the synchronization information that you want to view. Displays true if an administrator has enabled synchronization; otherwise, displays false. The maximum number of backup subnet managers that the master subnet manager supports. The interval, in seconds, during which a synchronization session status management diagram packet must arrive at the master subnet manager to maintain synchronization. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-99