Cisco SFS7000P-SK9 Command Reference - Page 64

enable Chapter 2 Administrative Commands enable To enter Privileged Exec mode from User Exec mode, enter the enable command in User Exec mode. To enable a trunk group, enter the enable command in Trunk Interface Configuration submode. enable Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes User Execute mode, Trunk Interface Configuration (config-if-trunk) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-only user. Enter the enable command in User Exec mode to make administrative configuration changes to your Server Switch. Enter the enable command in Trunk Interface Configuration submode to activate a trunk group. Examples The following example enters Privileged Exec mode from User Exec mode: SFS-7000P> enable SFS-7000P# The following example enables a new trunk group: SFS-7000P(config-if-trunk)# enable Related Commands config TACACS-server host disable exit 2-34 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02