Cisco SFS7000P-SK9 Command Reference - Page 349
show ip
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
Chapter 6 Show Commands show ip show ip To display IP configuration data, enter the show ip command in User Exec mode or Privileged Exec mode. show ip [address-table | route | http [server secure]] Syntax Description address-table route http server secure (Optional) This keyword displays the address information of Ethernet interface ports, Ethernet interface cards, and InfiniBand interface cards. It lists the IP addresses, netmasks, broadcast formats, reassembly sizes, and whether or not the IP address is a primary or backup. (Optional) This keyword displays the Classless Inter-Domain Routing (CIDR) forwarding records or routes (both static and dynamic) of all IP routes to system ports. Included in this information are the route destination, route type, route protocol, next hop, and port used. (Optional) Displays current HTTP settings. (Optional) Displays current secure HTTP server settings. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Use this command to view the results of the ip command. Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Ethernet read-only user. Examples The example below shows the output of the show ip address-table command. Note that port 0 always indicates the gateway port of the interface card. SFS-7000P# show ip address-table IP Address Table port address mask bcast-addr reasm type status format max-size 4/0 192.168.2.1 255.255.255.0 1 0 primary active 4/1 192.168.1.1 255.255.255.0 1 0 primary active 4/2 192.168.3.1 255.255.255.0 1 0 primary active SFS-7000P# OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-183