Cisco SFS7000P-SK9 Command Reference - Page 161
auto-negotiate, show interface ethernet, speed, half-duplex
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Chapter 5 IP Commands half-duplex half-duplex To configure an Ethernet connection in half duplex mode, enter the half-duplex command in Ethernet Interface Configuration submode. To undo this configuration, use the no form of this command. half-duplex no half-duplex Syntax Description This command has no arguments or keywords. Defaults Your Server Switch runs in full duplex mode by default. Command Modes Ethernet Interface Configuration (config-if-ether) submode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 3012 Privilege Level: Ethernet read-write user. If you disable auto-negotiation, set speed and duplex mode with the half-duplex command and speed command. You cannot manually configure half duplex mode while auto-negotiation runs on your Server Switch or while the connection speed exceeds 1000 Mbps. Note The 6-port Ethernet gateway does not support half duplex transmission or 10 Mbps speed. Examples The example below configures half duplex mode for ports 1 - 4 on slot 4: SFS-7000P(config-if-ether-4/1-4/4)# half-duplex Related Commands auto-negotiate show interface ethernet speed OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 5-7