Cisco SFS7000P-SK9 Command Reference - Page 199

Chapter 6 Show Commands show diagnostic card show diagnostic card To display completed or ongoing diagnostic tests for cards, enter the show diagnostic card command in User Exec mode or Privileged Exec mode. show diagnostic card {all | card-selection} Syntax Description all card-selection Specifies all cards on the Server Switch. Card or cards with the tests that you want to view. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted read-write user. Command Output: Table 6-10 describes the fields in the show diagnostic card command. Table 6-10 show diagnostic card Command Field Descriptions Field Description test Test that ran or runs on the card. slot-id Slot of the card. iterations Number of iterations that the test completed. action Last action that an administrator applied to the test. result Result of the last action that an administrator applied to the test. percentage-completed Percentage of the test that has executed. result-string Diagnostic test results. Examples The following example displays the completed and ongoing diagnostic tests on card 3: SFS-7000P# show diag card 3 Diagnostic Tests For Cards OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-33