Cisco SFS7000P-SK9 Command Reference - Page 389

Chapter 7 Diagnostic Commands start start To begin a diagnostic test, enter the start command in the appropriate Interface DiagnosticConfiguration submode. start Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes Fibre Channel Interface Diagnostic Configuration (config-diag-if-fc) submode, Ethernet Interface Diagnostic Configuration (config-diag-if-en) submode, or Card Interface Diagnostic Configuration (config-diag-if-card) submode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted and general read-write user. Examples The following example starts a LED diag test on a Fibre Channel interface: SFS-7000P(config-diag-if-fc-4/1)# test led SFS-7000P(config-diag-if-fc-4/1)# start The following example starts a self-test diagnostic test on a card: FS-7000P (config-diag-card-6)# test self-test SFS-7000P (config-diag-card-6)# start Related Commands diagnostic show interface ethernet show interface fc show interface gateway stop test OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 7-223