Cisco SFS7000P-SK9 Command Reference - Page 345
gateway, telnet, Cisco SFS 7000 Series Product Family Command Reference Guide, OL-9163-02,
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
Chapter 6 Show Commands show interface mgmt-ib show interface mgmt-ib To display the status and address information for the virtual InfiniBand Management port, enter the show interface mgmt-ib command in User Exec mode or Privileged Exec mode. show interface mgmt-ib Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-only user. Use this command to verify that you have configured your InfiniBand Management port successfully. Compare this output to the configuration file and check for discrepancies. You must configure the InfiniBand Management port successfully to run telnet, SSH, and Element Manager. Examples The following example displays the status and address information of the InfiniBand Management port: SFS-7000P# show interface mgmt-ib Mgmt-InfiniBand Information descr : Inband Management Port admin-status : up ip-addr : 192.168.2.200 mask : 255.255.255.0 gateway-addr : 0.0.0.0 SFS-7000P# Related Commands gateway telnet OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-179