Cisco SFS7000P-SK9 Command Reference - Page 51

Chapter 2 Administrative Commands clock set clock set To manually configure the time and date of the on-board Server Switch clock, enter the clock set command in Privileged Exec mode. clock set hh:mm:ss dd mm yy Syntax Description hh mm ss dd mm yy Hour to assign. Minute to assign. Second to assign. Day to assign. Month to assign. Year to assign. Defaults This command has no default settings. Command Modes Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted and general read-write user. Your Server Switch uses one of the following means to maintain system time: • an on-board system clock • an external NTP server (recommended) When you first power on your Server Switch, factory-default system clock settings run. To ensure accurate synchronization, we recommend that you use an external NTP server, as it will synchronize log dates with other management systems. To configure NTP servers, refer to the "ntp" section on page 2-55. Examples The following example sets the clock time to 7:22 PM and 10 seconds on the 25th of May, 2015: SFS-7000P# clock set 19:22:10 25 05 15 Related Commands card ntp radius-server show clock OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 2-21