Cisco SFS7000P-SK9 Command Reference - Page 76
auto-negotiate, shutdown, show snmp, snmp-server, link-trap
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
link-trap Chapter 2 Administrative Commands link-trap To configure internal and external ports to generate link-up and link-down SNMP traps when the operating status (oper-status) of the ports changes, enter the link-trap command in the appropriate Interface Configuration mode. To disable this function, use the no form of this command. link-trap no link-trap Syntax Description This command has no arguments or keywords. Defaults By default, ports do not generate link traps. Command Modes All Interface Configuration submodes. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Fibre Channel read-write user, Ethernet read-write user. Ports generate link-up traps when the oper-status of the port changes to up and link-down traps when the oper-status of the port changes to down. Trap receivers (that you define with the snmp-server command) receive the traps. You can then perform link validation and checking with the receivers, or configure SNMP alerts. Examples The following example enables link-trap generation for Fibre Channel interface ports 1 and 2 on card 5: SFS-7000P(config-if-fc-5/1-5/2)# link-trap The following example enables link-trap generation for InfiniBand interface ports 1 through 5 on card 15. The resulting traps are sent to trap receivers, as defined by the snmp-server command: SFS-7000P(config-if-ib-15/1-15/5)# link-trap The following example enables link-trap generation for Ethernet interface port 1 on card 4. The resulting traps are sent to trap receivers, as defined by the snmp-server command: SFS-7000P(config-if-ether-4/1)# link-trap Related Commands auto-negotiate shutdown show snmp snmp-server 2-46 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02