Cisco SFS7000P-SK9 Command Reference - Page 110

username Chapter 2 Administrative Commands username To reconfigure or create and configure user accounts, enter the username command in Global Configuration mode. To delete a user account, use the no form of this command. username user password passwd Creates a new user account. username user {[disable | enable] | [community-string string | no-community-string] | privilege priv[priv priv...]} Reconfigures an existing user account no username user Deletes an existing user account. Syntax Description password disable enable community-string no-community-string privilege user passwd string priv Configures the password for the user account. (Optional) Disables the user account. (Optional) Enables the user account. (Optional) Assigns a SNMP community string to the user account. (Optional) Clears the SNMP community string of the user. Assigns access privileges to the user. Note When you assign privileges, new privileges completely overwrite your previous privilege settings. If you omit an access privilege, the user account will lose this privilege even if you previously assigned it to the account. Account login name (up to 20 alphanumeric characters). Account password (5 to 34 alphanumeric characters). SNMP community string. (Optional) Access privilege. The priv variable may be any of the following: • ib-ro, for InfiniBand read-only access • ib-rw, for InfiniBand read-write access • ip-ethernet-ro, for Ethernet read-only access • ip-ethernet-rw, for Ethernet read-write access • fc-ro, for Fibre Channel read-only access • fc-rw, for Fibre Channel read-write access • unrestricted-rw, for universal read-write access Defaults Guest user accounts are disabled by default. All other user accounts are enabled. Command Modes Global Configuration (config) mode. 2-80 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02