Cisco SFS7000P-SK9 Command Reference - Page 147
ca-link-hoqlife
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 4 InfiniBand Commands ib sm sweep-interval interval lid-mask-control LMC master-poll-interval mp-interval master-poll-retries retries max-active-sms SMs switch-life-time sw-link-hoqlife ca-link-hoqlife life max-hops integer integer mad-retries retries node-timeout seconds response-timeout milliseconds wait-report-response sa-mad-queue-depth size (Optional) Specifies how frequently the SM queries the InfiniBand fabric for network changes. (Optional) Frequency, in seconds, at which the SM queries the InfiniBand fabric for network changes. (Optional) Assigns the number of path bits present in the base LID to each channel adapter port. Increasing the LMC value increases the number of LIDs assigned to each port to increase the number of potential paths to reach each port. This value defaults to 0. (Optional) Number of path bits. (Optional) Specifies the interval at which the slave SM polls the master to see if it still runs. (Optional) Poll interval, in seconds. This value defaults to 3 seconds. (Optional) Specifies the number of unanswered polls that cause the slave to identify the master as dead. (Optional) Number of unanswered polls (integer). This value defaults to 2. (Optional) Specifies the maximum number of standby SMs that the master supports. This value defaults to 0, which indicates unlimited SMs. (Optional) Number of standby SMs that the master supports (integer). (Optional) Specifies the packet lifetime inside a Server Switch. (Optional) Specifies the packet lifetime at the head-of-queue of a switch port. (Optional) Specifies the lifetime of a packet at the head-of-queue of the host port. (Optional) lifetime interval (0 - 20). The interval is a function of microseconds. (Optional) Configure maximum length path for SM to examine for routing. (Optional) Specifies the number of hops. Range is from 0 to 64. Default is 64. Number of times the SM will retry sending a MAD after not receiving a response. The value range is 0 - 100; the default value is 5. Minimum amount of time in seconds that a HCA may be unresponsive before the SM will remove it from the IB fabric. The value range is 1 - 2000 seconds; the default value is 10 seconds. (Optional) Maximum amount of time in milliseconds that the SM waits for a response before resending a MAD. The value range is 100-5000 milliseconds; the default value is 200 milliseconds. Determines whether SM waits to receive ReportResponse MADs once. If boolean value is false, SM sends Report MADs once. If true, the SM continues to send Report MADs until either the ReportResponse MAD is received or the maximum number of Report MADs are sent. Default is false. Size of the SA's internal queue for receiving MADs. The value range is 256 - 1024; the default value is 256. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 4-9