Cisco SFS7000P-SK9 Command Reference - Page 315

show interface ethernet, link-trap, Table 6-55, show interface ethernet Command Field Descriptions

Page 315 highlights

Chapter 6 Show Commands show interface ethernet Command Output: Table 6-55 describes the fields in the show interface ethernet command output. Table 6-55 show interface ethernet Command Field Descriptions Field Description port Port number, in slot#/port# format. name Administratively-configured port name. type Type of port. desc Name that you assign with the name command. last-change Time of the most recent configuration change that a user made to the port. mac-address MAC address of the port. mtu Maximum transmission unit (MTU) of the port, in bytes. auto-negotiate-supported Displays "yes" if the port supports auto-negotiation. auto-negotiate Displays "enabled" if you have configured auto-negotiation to run on the port. admin-status Administrative status of the port. oper-status Operational status of the port. admin-speed Administrative speed that you configured on the port. oper-speed Operational (actual) speed at which the port runs. Actual speed differs from admin speed if the port on the other end of the connection cannot support the speed that you configured. admin-duplex Administrative duplex type (half or full) that you configured to run on the port. oper-duplex Operational (actual) duplex type at which the port runs. Actual duplex type differs from admin duplex type if the port on the other end of the connection cannot support the type that you specified. link-trap Displays "enabled" if you configured the port to send link traps with the link-trap command. action Action (such as flushing the ARP table) that you had the interface perform. result Status of the action that you had the interface perform. Table 6-56 describes the fields in the ip keyword output. Table 6-56 ip Keyword Output Field Descriptions Field port address mask bcast-addr format Description Port number, in card#port# format. A port# of 0 represents the gateway port of the interface card. IP address that you assigned to the port. Subnet mask that you assigned to the port. IP broadcast address format that the port uses. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-149

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386
  • 387
  • 388
  • 389
  • 390
  • 391
  • 392
  • 393
  • 394
  • 395
  • 396
  • 397
  • 398
  • 399
  • 400
  • 401
  • 402
  • 403
  • 404

6-149
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6
Show Commands
show interface ethernet
Command Output:
Table 6-55
describes the fields in the
show interface ethernet
command output.
Table 6-56
describes the fields in the
ip
keyword output.
Table 6-55
show interface ethernet Command Field Descriptions
Field
Description
port
Port number, in slot#/port# format.
name
Administratively-configured port name.
type
Type of port.
desc
Name that you assign with the
name
command.
last-change
Time of the most recent configuration change that a user made to the port.
mac-address
MAC address of the port.
mtu
Maximum transmission unit (MTU) of the port, in bytes.
auto-negotiate-supported
Displays “yes” if the port supports auto-negotiation.
auto-negotiate
Displays “enabled” if you have configured auto-negotiation to run on the
port.
admin-status
Administrative status of the port.
oper-status
Operational status of the port.
admin-speed
Administrative speed that you configured on the port.
oper-speed
Operational (actual) speed at which the port runs. Actual speed differs from
admin speed if the port on the other end of the connection cannot support
the speed that you configured.
admin-duplex
Administrative duplex type (half or full) that you configured to run on the
port.
oper-duplex
Operational (actual) duplex type at which the port runs. Actual duplex type
differs from admin duplex type if the port on the other end of the connection
cannot support the type that you specified.
link-trap
Displays “enabled” if you configured the port to send link traps with the
link-trap
command.
action
Action (such as flushing the ARP table) that you had the interface perform.
result
Status of the action that you had the interface perform.
Table 6-56
ip Keyword Output Field Descriptions
Field
Description
port
Port number, in card#port# format. A port# of
0
represents the gateway port of the
interface card.
address
IP address that you assigned to the port.
mask
Subnet mask that you assigned to the port.
bcast-addr format
IP broadcast address format that the port uses.