Cisco SFS7000P-SK9 Command Reference - Page 310
Table 6-53, sl-vl-map Keyword Output Field Descriptions, Forwarding Table.
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
show ib-agent switch Chapter 6 Show Commands Table 6-53 describes the fields in the sl-vl-map keyword output. Table 6-53 sl-vl-map Keyword Output Field Descriptions Field node-guid in-ib-port out-ib-port SL to VL mapping Description GUID of the SMA node. The ingress port of an InfiniBand data packet. The egress port of an InfiniBand data packet. For each service lane, show the underlying virtual lane which will be used for a packet on the given ingress port, which will be routed out the given egress port. Table 6-54 describes the switch info keyword output fields. Table 6-54 switch info Keyword Output Field Descriptions Field guid lft-cap rft-cap mft-cap lft-top default-port def-mcast-pri-port def-mcast-NP-port life-time-value port-state-change lids-per-port partition-enf-cap inbound-enf-cap outbound-enf-cap filter-raw-pkt-in-cap filter-raw-pkt-out-cap Description GUID of the SMA node. The current maximum used entry in the Linear Forwarding Table. The maximum capacity of the switch Random Forwarding Table. (This capacity is generally unmet, since only one LFT or RFT is implemented on any given switch and all Cisco SFS 7000 switches use the LFT.) The maximum capacity of the Multicast Forwarding Table. The current maximum used entry in the Linear Forwarding Table. Port used if the Random Forwarding Table is implemented. This port is the one to which packets are sent when the LID is not specified in the Random Forwarding Table. Default Multicast Primary Port-port to which multicast packets are sent when the LID is not present in the Multicast Forwarding Table. Default Multicast Not Primary Port-Same as above, but for multicast packets arriving on the Default Multicast Primary Port. Specifies the maximum time a packet can live in the switch. See the InfiniBand specification for the definition of this value. Indicates that a port on the switch has changed its state. Used by the subnet manager to determine if it needs to look at the port states. Specifies the number of LID/LMC combinations that may be used per port if the Random Forwarding Table is implemented. The number of entries in the Partition Enforcement Table per port. Indicates whether or not the switch is capable of partition enforcement on inbound (received) packets. Indicates whether or not the switch is capable of partition enforcement on outbound (transmitted) packets. Indicates whether or not the switch is capable of raw packet enforcement on inbound (received) packets. Indicates whether or not the switch is capable of raw packet enforcement on outbound (transmitted) packets. 6-144 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02