Cisco SFS7000P-SK9 Command Reference - Page 196

show config Chapter 6 Show Commands show config To display the startup configuration, enter the show config command in User Exec mode or Privileged Exec mode. show config Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted read-write user. The show config command displays the current configuration as a series of commands in the format that you use when you execute commands in a CLI session. This command queries all active service components to collect their current configuration data and translates the data into a CLI command format. This record of the configuration may be saved, edited, and reused to replicate a configuration. Note ITLs (see the "fc srp itl" section on page 3-9) with default attributes (see the "fc srp-global itl" section on page 3-19) do not appear in the show config command output. Examples The following example displays the running configuration on the Server Switch: SFS-7000P# show config enable config terminal card 2 type en4port1G no shutdown ib sm subnet-prefix fe:80:00:00:00:00:00:00 priority 0 interface gateway 2 authentication login default local tacacs ip address 192.168.2.1 255.255.255.0 interface ethernet 2/1 ip address 192.168.1.1 255.255.255.0 6-30 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02