Cisco SFS7000P-SK9 Command Reference - Page 316

show interface ethernet Chapter 6 Show Commands Table 6-56 ip Keyword Output Field Descriptions (continued) Field reasm max-size type status Description Size of the largest IP datagram which this port can receive and reassemble from incoming fragmented IP datagrams. Displays "primary" or "backup" to indicate that the interface card acts as the primary or backup interface for the IP address that appears in the address field. Displays "active" or "inactive" to indicate that the card actively services IP packets addressed to the IP address in the address field or does not service packets to the specified address. Table 6-57 describes the fields in the ip-info keyword output. Table 6-57 ip-info Keyword Output Field Descriptions Field Description port Port number, in slot#/port# format. default-ttl Default time-to-live value, in seconds. in-receives Cumulative number of input datagrams (including errors) that interfaces received for the IP address that you specified with the ip keyword. in-hdr-errors Cumulative number of datagrams that interfaces discarded. Reasons to discard a datagram include the following: • bad checksums • version number mismatches • format errors • exceeded time-to-live values • IP option processing errors in-addr-errors Cumulative number of input datagrams that ports discarded because the IP address in the destination field of the header of the datagram was not a valid address to be received by the port. forw-datagrams Cumulative number of datagrams that arrived at the port en-route to a final destination. For non-IP-gateway ports, this value includes only packets that the port Source-Routed successfully. in-unknown-protos Cumulative number of datagrams that the port successfully received but discarded due to an unknown or unsupported protocol. in-discards Cumulative number of datagrams that the port discarded for a reason other than a problem with the datagram (for example, lack of buffer space). in-delivers Cumulative number of input datagrams that the port successfully delivered to IP user-protocols, including Internet Control-Message Protocol (ICMP). out-requests Cumulative number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in-requests. This counter does not include any datagrams counted as forw-datagrams. out-discards Cumulative number of output IP datagrams that the port discarded for a reason other than a problem with the datagram (for example, lack of buffer space). 6-150 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02