Cisco SFS7000P-SK9 Command Reference - Page 329

Chapter 6 Show Commands show interface gateway Command Output: Table 6-64 describes the fields in the show interface gateway command output. Table 6-64 show interface gateway Command Field Descriptions Field gateway name type desc last-change mtu admin-status oper-status Description Number of the slot in which the gateway resides. Administrative name that you configure with the name command. Type of interface card, either Ethernet or Fibre Channel. Description of the port, in slot#/port# format. The port identifier appears as zero (0) to indicate an internal port. The number in parentheses serves as the SNMP identifier. Time of the most recent configuration change that a user made to the port. Maximum transmission unit (MTU) of the internal gateway port. Administrative status of the gateway that you configure with the shutdown command. Actual status of the gateway. Table 6-65 describes the fields that appear when you use the fc srp initiator-target argument with the show interface gateway command. Table 6-65 fc srp initiator-target Keyword Output Field Descriptions Field Description wwpn World-wide port name (WWPN) of the target that the initiator can access. wwnn Wold-wide node name (WWNN) of the target that the initiator can access. description Description of the target. ioc-guid GUID of the IOC assigned to the target. service-name Service that the target runs. protocol-ids Lists the protocols that the target supports. fc-address Fibre Channel protocol address of the target. mtu Maximum transmission unit (MTU) of the target. connection-type Type of connection between the storage and the InfiniBand host. The field will always display nl-port, because all storage-to-IB host connections occur over a virtual port, or NL_Port. physical-access Port or ports through which the target connects to the initiator. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-163