Cisco SFS7000P-SK9 Command Reference - Page 341

Chapter 6 Show Commands show interface ib Examples Table 6-73 statistics Keyword Output Field Descriptions (continued) Field out-multicast-pkts out-broadcast-pkts out-discards out-errors Description Total number of packets that higher-level protocols requested be transmitted and that were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. Total number of packets that higher-level protocols requested to be transmitted and that were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free-up buffer space. For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. The following example shows the output of the show interface ib command without the sma or statistics keywords: SFS-270# show interface ib 4/7 InfiniBand Interface Information port : 1 name : 1 type : ib4xTXP desc : 1 (65) last-change : none mtu : 0 auto-negotiate-supported : yes auto-negotiate : disabled admin-status : up oper-status : down admin-speed : 10gbps oper-speed : unknown link-trap : enabled phy-state : polling dongle-type : ib4xFX OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-175