Cisco SFS7000P-SK9 Command Reference - Page 88

radius-server Chapter 2 Administrative Commands radius-server To configure up to three RADIUS servers that your Server Switch uses to authenticate CLI user logins, enter the radius-server command in Global Configuration mode. To remove a RADIUS server from the configuration, use the no form of this command. radius-server host ip-address [auth-port udp-port] [timeout seconds] [retransmit retries] [key encryption-key] no radius-server host ip-address Syntax Description host ip-address auth-port udp-port timeout seconds retransmit retries key encryption-key Specifies the IP address of the RADIUS server. IP address of the RADIUS server. (Optional) Specifies the user datagram protocol (UDP) authentication port of the RADIUS server. (Optional) UDP authentication port of the RADIUS server. (Optional) Specifies the amount of time that your Server Switch waits for a reply from the server before the login request times out. (Optional) Amount of time, in seconds, that your Server Switch waits for a reply from the server before the login request times out. (Optional) Specifies the number of times that your Server Switch tries to authenticate after a timeout. (Optional) Number of times that your Server Switch tries to authenticate after a timeout. (Optional) Specifies the authentication key that the client and radius server use. (Optional) Encryption key that the client and radius server use. Defaults The RADIUS server IP address defaults to 0.0.0.0, which assigns no server, and the Server Switch authenticates locally by default. The udp-port variable defaults to 1812. Command Modes Global Configuration (config) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted read-write access. 2-58 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02