Cisco SFS7000P-SK9 Command Reference - Page 121

Chapter 3 Fibre Channel Commands fc srp it fc srp it To configure an initiator-target (IT) pair-a fully-configured link between an initiator and a target storage device port-with your Server Switch, enter the fc srp it command in Global Configuration mode. To delete or reconfigure an IT pair entry from the configuration file, use the no form of this command. fc srp it guid extension wwpn {description "descr" | discover-itl | gateway-portmask-policy {default | test-mode | restricted port-selection}} no fc srp it guid extension wwpn [test-mode | gateway-portmask-policy restricted port-selection] Syntax Description guid extension wwpn description descr discover-itl gateway-portmaskpolicy default restricted port-selection test-mode Global unique identifier (GUID) of the initiator. GUID extension of the initiator. World-wide port name (WWPN) of the target port of the FC storage device. Assigns a description to the initiator-target pair. Alphanumeric description to assign to the initiator target. Discovers initiator-target-LUN (ITL) groups for the specified target and adds them to the configuration file. For detailed information on ITLs, refer to the Fibre Channel Gateway User Guide. (Optional) Designates the physical FC gateway ports that the initiator can use to access the storage port. When you add FC gateway ports to the policy, the initiator cannot use those ports to access the storage. When you use the no keyword to remove FC gateway ports from the policy, the initiator can access the storage through those ports. Assigns the global gateway portmask policy to the IT. To view your default policy, enter the show fc srp-global command (in User Exec mode or Privileged Exec mode) and view the default-gateway-portmask-policy field. (Optional) Denies the initiator access to the ports that you specify with the port-selection variable. Use the no form of the command to add ports to the policy to grant the initiator access. (Optional) Port, list of ports, or range of ports to which you grant or deny the initiator access. (Optional) Sets an inactive initiator-target pairing to test mode, which configures the FC gateway to log in to storage persistently and block log-ins from SRP hosts (initiators). Use test mode as you set up your Fibre Channel connections, then use the no form of the command to return to normal mode. Note You cannot configure an active IT to test mode. Active ITs must remain in normal mode. Note A test-mode configuration does not persist across reboots. Defaults By default, this policy denies initiators access to all targets. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 3-7