Cisco SFS7000P-SK9 Command Reference - Page 33

Chapter 2 Administrative Commands action action To execute predefined administrative functions on expansion modules (gateway cards), enter the action command in Card Configuration submode. action {delete-inactive-image | reset} Syntax Description delete-inactive-image reset Removes the inactive image from interface cards. Use the action command with the delete-inactive-image keyword after the boot-config command when you upgrade the system image on your Server Switch to clear the inactive image from the card(s) after a reboot. Resets the card(s) that you specify in a Cisco SFS 7008. Command Modes Card Configuration (config-card) mode. Defaults This command has no default settings. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Unrestricted or card-specific read-write user. Currently, you can execute only one predefined administrative function on all platforms except the Cisco SFS 7008. The function (delete-inactive-image) deletes inactive images from one or more cards to provide more available memory on the card. Before you use the action command with the delete-inactive-images keyword, enter the boot-config command with the primary-image-source keyword to install and activate the proper image on the card. When you execute this command, the previously-active image becomes inactive. You can now execute the action command to clear the inactive image from your card. To execute this command, you must have read-write administrative permission for the type(s) of card(s) that you want to clear. Examples The following example deletes inactive images from the card that resides in slot 2: SFS-7000P(config-card-2)# action delete-inactive-images The following example resets a management I/O card on a Cisco SFS 7008: SFS-270(config-card-15)# action reset OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 2-3