Cisco SFS7000P-SK9 Command Reference - Page 351
show ip http, ip http server, no ip, Table 6-76, show ip http Command Output Field Descriptions
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 351 highlights
Chapter 6 Show Commands show ip http show ip http To view the configuration of the HTTP server on your Server Switch, enter the show ip http command in User Exec mode or Privileged Exec mode. show ip http Syntax Description This command has no arguments or keywords. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Ethernet read-only user. Use this command to determine if your HTTP server actively runs on your Server Switch, and to determine the HTTP port number that it uses. Command Output: Table 6-76 describes the fields in the command output. Table 6-76 Field server port polling show ip http Command Output Field Descriptions Description Displays "enabled" if you have activated the server with the ip http server command. Displays "disabled" if you have deactivated the server with the no ip http server command. Displays the HTTP port number that the HTTP server uses. Displays "enabled" or "disabled" to indicate polling status. Examples The following example displays the configuration of the HTTP server on the Server Switch: SFS-270# show ip http IP HTTP Info server : enabled port : 80 polling : enabled OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-185