Cisco SFS7000P-SK9 Command Reference - Page 209
Cisco SFS 7000 Series Product Family Command Reference Guide, OL-9163-02, Show Commands, show diagnostic interface fc
UPC - 882658093029
View all Cisco SFS7000P-SK9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Chapter 6 Show Commands show diagnostic interface fc Examples The following example displays the completed and ongoing diagnostic tests on all Ethernet ports: SFS-7000P# show diagnostic interface ethernet all Diagnostic Tests For Ethernet Interfaces test : external-loopback port : 6/3 validation : enabled data-size : 0 data-pattern : 00:00:00:00 iterations : 0 action : stop result : none percentage-completed : 0 result-string : External Loopback Test In-progress, Current report : Passed=0, Failed=0, Total=0 The following example displays the diagnostic tests available: SFS-7000P(config)# diagnostic interface fc 6/1 SFS-7000P(config-diag-if-fc-6/1)# ? > diagnostic Configuration Commands: > data-pattern - Configure a data pattern to use in traffic test > cases > data-size - Configure size (in octects) of payload data > exit - Exit current mode > help - Show command help > history - Show command history > iterations - Configure number of iterations the test case > should be run > no - Disable a configuration or set default > source-id - Specify source identifier for use with FC Echo test > start - Initiate a test > stop - Stop a test > target-id - Specify target identifier for use with FC Echo test > test - Configure the test case to run > validate - Enable data validation to be performed on > received packets > Topspin-360(config-diag-if-fc-6/1)# test ? > echo - Configure Echo test > ext-loopback - Configure External-Loopback test > int-loopback - Configure Internal-Loopback test Related Commands show diagnostic OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-43