Cisco SFS7000P-SK9 Command Reference - Page 255

Chapter 6 Show Commands show ib pm port counter show ib pm port counter To display the performance monitoring counters for one or more InfiniBand ports, enter the show ib pm port counter config subnet-prefix command in User Execute mode or Privileged Execute mode. Use the following syntax for this version of the command: show ib pm port counter subnet-prefix prefix [node-guid guid [port-num port]] Syntax Descriptionx subnet-prefix prefix node-guid guid port-num port Subnet prefix to which the port belongs. Prefix number such as fe:80:00:00:00:00:00:00 GUID of the node to which the port belongs. GUID number such as 00:05:ad:00:00:01:0c:19 Port number on the node. Port number such as 1 Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Command Output: Table 6-33 shows the output from this command. Table 6-33 show ib pm port counter (version 2) Command Output subnet-prefix node-guid port-num chassis-guid slot-num ext-port-num data-is-valid symbol-errors link-recovery-errors link-downs rcv-errors rcv-remote-phy-errors Subnet prefix to which the port belongs. GUID of the node to which the port belongs Port number on the node GUID of the chassis to which the port belongs (if available) Slot number on the chassis to which the port belongs (if available) Port number (if available) on the chassis slot to which the port belongs If false, re-run the command to obtain valid data Symbol error counter Link Error Recovery counter Link Downed counter Port Receive Error counter Port Receive Remote Physical Error counter OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-89