Cisco SFS7000P-SK9 Command Reference - Page 42

Chapter 2 Administrative Commands card card To enter Card Configuration submode, enter the card command in Global Configuration mode. card {slot-list | all | digit | digit,digit | digit-digit} Syntax Description slot-list all digit | digit,digit Card, list of cards, or range of cards to configure. Configures all cards in the chassis. Specifies the slot numbers for cards you want to configure in the chassis. Defaults This command has no default settings. Command Modes Global Configuration (config) mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: Card-specific read-write user Enter Card Configuration submode to enable, disable, configure, and reinitialize cards in your Server Switch. Examples The following example enters Card Configuration submode for all cards on the Server Switch. Any commands that execute in this mode apply to all of the cards in the chassis. SFS-7000P(config)# card all SFS-7000P(config-card-1,6,11,15-16)# Related Commands clock set delete install show card show card-inventory shutdown 2-12 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02