Cisco SFS7000P-SK9 Command Reference - Page 267

Chapter 6 Show Commands show ib sm lft show ib sm lft Use this command to display the following: • Linear forwarding information based on the block number. • Linear entries that are currently in use by subnet manager. To display linear forwarding information based on the LID block number, enter the show ib sm lft command in User Exec mode or Privileged Exec mode. The command reports only entries that are currently in use by the subnet manager. show ib sm lft subnet-prefix {prefix | all}[lid lid | node-guide guid] Syntax Description subnet-prefix prefix all lid lid node-guide guid Subnet prefix of the subnet manager with the status that you want to view. Displays the linear forwarding table info for a specific subnet or all the subnets in the fabric. Currently, "all" is an alias to the subnet value of the local subnet manager. Local ID of the subnet. Local ID number. Guid of the switch node in the subnet with the FDB is to be accessed. Guid number. Defaults This command has no default settings. Command Modes User Exec mode, Privileged Exec mode. Usage Guidelines Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: InfiniBand read-only user. Command Output: Table 6-36 show ib sm lft Command Field Descriptions Field NodeGuid LID Port Description Guid of the switch node in the subnet with the FDB that you want to access. Local ID of the subnet. Port number. OL-9163-02 Cisco SFS 7000 Series Product Family Command Reference Guide 6-101