Dell EqualLogic PS6210XS EqualLogic Group Manager Administrator s Guide PS Ser - Page 76

• Example 4: Tunnel Mode (Host-to-Gateway) using PSK with Cisco ASA Configuration For information regarding connectivity considerations, limitations, and requirements for the various IPsec configurations, see IPsec Performance Considerations. Example 1: Transport Mode (Host-to-Host) with PSK and IPv4 Figure 10. Transport Mode (Host-to-Host) with Certificates or PSK illustrates a transport mode IPsec configuration in which one host is using IPv4 and PSK and another host is using IPv6 and certificates. Either IKEv1 or IKEv2 can be used in this configuration if supported by the host, but the example shown uses IKEv1. Figure 10. Transport Mode (Host-to-Host) with Certificates or PSK iSCSI Initiator Configuration In the example shown in Figure 10. Transport Mode (Host-to-Host) with Certificates or PSK, the host systems' iSCSI initiators are configured using the Microsoft iSCSI Initiator. The following tables show how the initiator should be configured for IPv4 and IPv6 connections. Table 18. iSCSI Initiator Configuration (IPv4) lists how the Microsoft iSCSI Initiator should be configured for the IPv4 connection shown in Figure 10. Transport Mode (Host-to-Host) with Certificates or PSK. Table 18. iSCSI Initiator Configuration (IPv4) Setting IPv4 Value Rule Name ToPSA_IPSEC_IPv4_CERT_IKEv1 Enabled? Yes Profiles Domain,Private,Public Mode Transport Endpoint1 10.125.56.10/32 Endpoint2 10.122.56.2/32 10.125.56.3/32 76 About Group-Level Security