Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 102
NetWare Setting, EtherTalk Setting, Subnet Mask, Gateway, Interface Configuration, Printer menu
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Printer Settings 15 Press [S] or [T] to select Subnet Mask and press [Change #]. 16 Set the address in the same manner as Steps 12 - 14 to set the IP address. 17 Press [S] or [T] to select Gateway and press [Change #]. 18 Set the address in the same manner as Steps 12 - 14 to set the IP address. 19 Press [Close]. The display returns to the Interface Configuration screen. 20 Press [Close]. The display is returned to the Printer menu screen. NetWare Setting To connect via the Netware protocol, set to [On] and set frame mode to [Auto], [802.3], [Ethernet II], [802.2] or [802.3SNAP]. 1 Refer to steps 1 - 4 of TCP/IP Settings on page 3-6 to display the Interface screen. 2 Press [S] or [T] to select NetWare and press [Change #]. Interface Setting Item NetWare TCP/IP Ethertalk Network Status Page Value On On On Off Parallel Network USB Printer menu Change # 3 Press [On] or [Off]. 4 Press [Close]. The display returns to the Interface screen. 5 Press [Close]. The display is returned to the Printer menu screen. EtherTalk Setting Set EtherTalk to [On] to connect this device to an Apple Macintosh computer. 1 Refer to steps 1 - 4 of TCP/IP Settings on page 3-6 to display the Interface screen. 2 Press [S] or [T] to select Ethertalk and press [Change #]. Interface Setting Item NetWare TCP/IP Ethertalk Network Status Page Value On On On Off Parallel Network USB Printer menu 3 Press [On] or [Off]. 4 Press [Close]. The display returns to the Interface screen. 5 Press [Close]. The display is returned to the Printer menu screen. Change # 3-8