Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 284
Drum Refresh, Developer Refresh, System Menu / Counter
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
System Menu 6 Press [+] or [-] to enter the value for H-1 from the chart for each of M (magenta), C (cyan) and Y (yellow). PrintPosAdjust (Details) Refer to the printed chart, and enter each value from where the black and colored lines seem straight. Press [+] to increase the value from 0 to 9. To decrease, press [-]. MH-1 B CH-1 0 YH-1 0 By pressing [-], the value changes from 0 to alphabetic letters, going from A to I. To move in the reverse direction, press [+]. System Menu - User adjustment 7 Press [Next] to continue entering the values for H-2 to H-7, and V-3. For each color, as in Step 6, enter the value read from the chart. Press [Back] to return to the previous screen and reenter the values. 8 Press [Completed.] after all values have been entered. Color registration begins. 9 Press [Close] after color registration is complete. 10 Press [Close]. The System Menu screen is displayed. Drum Refresh Refresh the drum when printed images are blurred or white spots appear on the image. 1 Press the System Menu/Counter key. 2 Press [User Adjustment]. 3 Press [Drum refresh]. System Menu / Counter User adjustment Auto gray adjust Laser Scan Cleaning Drum refresh Color Matching Color Calibrat. Color Regist. Developer refresh System Menu 4 Press [On]. Drum refresh begins. Wait approximately 100 seconds. 5 Press [Close] after drum refresh is complete. 6 Press [Close]. The display is returned to the System Menu screen. Developer Refresh When the printing is too light or incomplete, even though there is enough toner, refresh the developer. 1 Press the System Menu/Counter key. 2 Press [User Adjustment]. 7-36